
FourColor Ink
Switch between photos, weather and busy status on a four-color screen for glanceable desktop information.
USB firmware
Device firmware · NOTE4 monochrome / NOTE4C four-color
Jazz radio, weather trends, a brew counter and daily haiku on one e-paper dashboard. Tap a phone via NFC to count coffee or tea; customize blocks, themes and nine interface languages.

Jazz radio, weather trends, a brew counter and daily haiku on one e-paper dashboard. Tap a phone via NFC to count coffee or tea; customize blocks, themes and nine interface languages.
Install & use
Connect the device and give AI the detection results together with this firmware information.
USB chip information cannot distinguish monochrome from four-color screens. Confirm the model first.
Read the chip and capacity first, so AI needs fewer follow-up questions.
Detection may restart the device into download mode. It does not flash firmware; you still need to confirm the display model.
Not detected yet. You can also copy the task first and ask AI to help connect.
Codex on your computer can install dependencies and run programs locally.
Check compatibility → Prepare firmware and a full backup → Assist with local installation → Verify first run
After copying, start a new chat in Codex on your computer and paste the task.
Only project information and the device details selected here are included. Network addresses, accounts and keys are configured locally during installation.
The device shows the expected JazzTrix interface and continues to update correctly.
Ask AI to report the installation location, verification results and how to start again. Continue in the same conversation if something goes wrong.
NOTE4 / NOTE4C · ESP32-S3 / 16 MB Flash · ESP-IDF 6.0 · USB-C data cable · Wi-Fi
Preserve a full Flash backup and verify the existing partition layout and recovery path. No GitHub Releases package is currently available. Build the ESP32-S3 application in firmware with ESP-IDF 6.0 following the README. The author specifies application-only flashing at 0x20000, preserving the existing bootloader and partition table. This is not a full image for 0x0 and must not be applied to an unverified partition layout.
Hold the round button for about 2 seconds or double-tap, join JazzTrix-Setup, open http://192.168.4.1 and enter the pairing code. Configure home Wi-Fi, weather location, time zone and radio. Built-in cities or manual coordinates work for offline setup.
The project includes NOTE4 / NOTE4C panel detection and manual selection. Confirm the detected model; monochrome panels map red/yellow elements to black. Test weather, radio buttons and volume, then add a brew via phone NFC. Nine interface languages are available, while haiku remain English.
Source, dual-model implementation and author images reviewed; build, flashing and hardware not independently tested. Generating a task neither sends it nor performs installation.
This is standalone community firmware that replaces the device system. It does not run through the official local-push SDK or ZECTRIX Cloud Open API. Radio, online place search and data updates need their corresponding network services. The source is MIT-licensed, retaining notices for Karim, Tomasz Fiedoruk and third-party components.
NOTE4C project photo from the author’s repository; not evidence of our own hardware testing. Source, dual-model implementation and author images reviewed; build, flashing and hardware not independently tested